Engineered Electronic, Inc.
Engineered Electronic, Inc.
SYSTEMS  I  ROOM DEVICES  I  ACCESSORIES  I  POCKET PAGING  I  WIRING & MISC.  I  ABOUT EEI
©, Engineered Electronics, Inc.  I  www.JPSWebSolutions.com
ACCESSORIES
HOME
SYSTEMS
ROOM DEVICES
POCKET PAGING
WIRING & MISC.
ABOUT EEI

MASTER/ANNUNCIATOR ENCLOSURE INSTALLATION                                                                  

 

 

 

1.        Remove two (2) screws from bottom of front panel.

 

2.        Lift bottom edge of front panel far enough to clear bottom brackets.  Push toward top to release top brackets.

 

3.        Remove front panel from enclosure.        

 

 

DESK MOUNT

 

Direct cables through opening in back of enclosure and reassemble front panel.

 

SURFACE MOUNT

 

Remove six (6) nuts on inside of box holding two (2) side panels and install box on wall. Plug cables in and reassemble front panel.

 

FLUSH MOUNT

 

Remove six (6) nuts on inside of box holding two (2) side panels.  Cut proper opening in wall (SEE DATA SHEET).  Secure to wall using four (4) holes in side of box flange.   Plug cables in and reassemble front panel.